Select your Products >

Page : 1 | 2 | 3 |  VE/LAB/00001  HOT AIR OVEN CONSTRUCTION Vitco Oven is double wall designed on memmert pattern. The inner chamber is made of Aluminum/S.S. with grooves to adjust shelves at any convenient height. The gap of 3” between the two chambers is filled with pure white. Glass wool to avoid the loss of heat. The door is fitted or heavy chromium plated hinges with A spring and automatic roller to and fro latch made of brass. ELEMENTS Heating elements are made of nickel/chromium plated nichrome wire, which are placed in the ribs at the bottom and sides. TEMPERATURE CONTROL A precision thermostat to work from 5°c above room temperature to 250°c with an accuracy of +- 1 to 2°c controls the temperature. VENTILATION Air Ventilator is placed near the top of the sides. which transfer air by gravity convention. NORMAL EQUIPMENTS The panel, which is below the door, consists of 3-heat switch for low medium and high, two pilot lamps and a thermostat built up in L shaped Horizontal thermometer, two movable metal shelves, plug and cord to work on 220/30 Volts A/C. FINISH It is finished in durable blued white stove enamel paint. Height Width Depth 12" 12" 12" 14" 14" 14" 16" 16" 16" 18" 18" 18" 24" 18" 18" 24" 24" 24" 36" 24" 24"  VE/LAB/00002  INCUBATOR BACTERIOLOGICAL CONSTRUCTION Vitco Oven is double wall designed on memmert pattern. The inner chamber is made of Aluminum/S.S. with grooves to adjust shelves at any convenient height. The gap of 3” between the two chambers is filled with pure white. Glass wool to avoid the loss of heat. The door is fitted or heavy chromium plated hinges with A spring and automatic roller to and fro latch made of brass. ELEMENTS Placed at the bottoms and sides for uniform temperature. TEMPERATURE CONTROL Temp is controlled by a sensitive thermostat to work on 5 °c. To 65 °c with temp uniformity of 0.5 °c. VENTILATION Air Ventilator Are placed near the top of the sides. Which transfer air by gravity convention. NORMAL EQUIPMENTS The panel which is below the door consists of 3 heat switch for low medium and high, two pilot lamps and a thermometer is fitted just above the door with the range of 0 to110 .Two moveable metal shelves, plug and cord to work on 220/30 Volts A/C. FINISH It is finished in durable blued white stove enamel paint. Height Width Depth 12" 12" 12" 14" 14" 14" 16" 16" 16" 18" 18" 18" 24" 18" 18" 24" 24" 24" 36" 24" 24"  VE/LAB/00003  WATER BATH RECTANGULAR THERMOSTATICALLY CONTROLLED CONSTRUCTION VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1”between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath is made of brass/copper with concentricing of 75mm dia, which are nicely chromium plated. HEATERS The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature. TEMPERATURE CONTROL The temperature is controlled up to 100 °c with an accuracy of + 0.5 °c. FINISH The bath is painted in blued white stoved enamel paint with a colored panel. NORMAL EQUIPMENTS The panel has an on off switch . Two light and a thermostat.It is also provided with a drain cork plug and cord to work on 220/30 Volts AC. 12” x 10” x 4” with 6 holes of 3” dia 12” x 12” x 4” with 9 holes of 3” dia 16” x 12” x 4” with 12 holes of 3” dia  VE/LAB/00004  AUTOCLAVE, STAINLESS STEEL, ELECTRIC A compact easy to use electrically heated autoclave, in stainless steel. The lid locking system meets tough safety requirements. Equiped with pressure gauge, thermometer and safety valve normal operation is at 121 deg. C. Suitable for culture media. Size: 12" x 12" 12" x 16" 12" x 18"  VE/LAB/00005  SEROLOGICAL WATER BATH CONSTRUCTION VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1” between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath has a pyramid type of lid made of Aluminium. HEATERS The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature. TEMPERATURE CONTROL The temperature is controlled by a sensitive thermostat to work from 5°C Above room temperature to 80°Cwith an accuracy of +-0.5 °C. FINISH The equipment is Finished in a durable blued eyed enamel paint with a coloured panel and lid. Page : 1 | 2 | 3 |